Haier AB072XCBAA, Руководство по обслуживанию, Страница: 129 / 181

8.2 Electric funtions of outdoor
8.2.1 Control of the compressor, outdoor motor and 4-way valve
8.2.1.1 Outdoor fan motor control
A. When system do not have overheating or over current protection, outdoor fan speed
will vary with outdoor ambient temperature, as follows:
a. in cooling mode
te
mp
era
tur
e a
ris
e
super low speed
low speed
med speed
high speed
super low speed
low speed
med speed
high speed
15 ℃
24 ℃
28
℃
13 ℃
22 ℃
26
℃
te
mp
er
at
u
re reduce
outdoor fan motor
b.
in heating mode (heat pump unit)
te
m
pe
rat
u
re aris
e
super low speed
low speed
med speed
high speed
11 ℃
19 ℃
9 ℃
16 ℃
temper
atur
e r
ed
uc
e
outdoor fan motor
super low speed
low speed
med speed
high speed
22
℃
23
℃
B.When fan speed changes, if it is from Low speed to High speed, there is no time delay;
if it is from High speed to Low speed, there is 45-second delay.
C.In cooling mode, in one minute before the compressor begins to run,the outdoor motor
will be switched on to run.
D.Super low speed control:outdoor motor will be off for 1 minute at the interval of 45
seconds.
8.2.1.2 Compressor control
After receiving the “compressor ON” signal sent from indoor unit, the compressor will run.
Its running-stop interval is 3 minutes. Being powered on firstly is without 3-minute delay.
If the two systems receive the “compressor ON” signal simultaneously,they will start up in
turn, and the interval is 20 seconds.
8.2.1.3 4-way valve control
A. In cooling or dehumidification mode, 4-way valve is not electrified.
B. When receiving the “heating” and “compressor ON” signal from indoor unit, 4-way
valve and compressor will start up simultaneously.
C. In 3 minutes after heating is over, it will be shut off 2 minutes and 50 seconds later. In
3-minute standby period, at 2-minute and 50-second clock, it is electrified.
D. Changing from cooling mode to heating mode, 3 minutes later, it is eletrified.
>a__WcU[S^ <[c >a`V[e[a`Wc
-129-