background image

Poor color / tint,
good sound 

Before calling service personnel, please check the following chart for a 

Symptom

Check these things

   TV is not 
  turned  on

Spots appear 
on the screen

Lines appear 
on the screen

Good picture ,
no sound

Remote control 
does not work

Be sure the power cord is plugged in.

The MUTE function may be used.
Adjust the volume of the TV set.

The contrast, color and tint may be incorrectly adjusted.
If you change the direction of the TV while the TV is on, the picture 
may suffer from color shading. If so, turn off the TV and allow about 
30 minutes to cool, then turn on the TV again.

The broadcast signal may be jammed by other electrical sources such 
as cars, motorcycles, electric trains, high tension lines, neon signs, hair 
dryers.

The broadcast signal may be jammed by other TV receivers, personal 
computers, and TV games, as well as interference from radio stations.

Interference may be due to broadcast waves reflected from mountains 
or buildings.
Check if the direction of the antenna is changed.

The antenna may be disconnected or falling out.
Check if the direction of the antenna is changed.

The batteries in the remote control may be exhausted.
The batteries  may be improperly installed.
Check if there are obstacles between the remote control and the 
remote (infrared ray) receiver.
Check if there is strong light interference around the remote (infrared) 
receiver.
Check if the main power is ON. 

Double images 
or ghosts

Snowy picture or 
black screen

The following conditions are not troubles

Clacking noise inside
 the receiver

It may result from the expansion of the shell caused by a temperature 
change. This will not affect the picture and sound quality.

Uneven colour in a 
certain portion of the 
screen

If the picture is too bright, this may occur according to the nature of 
the pictures. Reduce the contrast, it may resume to normal.

Troubleshooting

CAUTION

In case of problems, have your TV serviced by qualified personnel.Never 
attempt to service the set yourself since opening the cabinet may expose 
you to dangerous voltage or other hazards.

possible cause to the trouble you are experiencing. 

Содержание 21F6B-T

































Отзывы: