Haier 1U09ES2VHA, Руководство по обслуживанию

Страница: 20 / 76

REMOTE CONTROL FUNCTIONS
PAGE 20
ENGLISH
3
8
6
17
4
15
16
12
10
9
7
5
14
2
13
11
1
1
Power Button
Press the ON/OFF button on the remote control to start
the unit.
2
QUIET Button
This function may be used when silence is needed for rest or
reading. Press the QUIET
48,(7
button, the remote control
will display the QUIET icon and switch the unit to the
quiet function. Press the QUIET 48,(7 button again to cancel
this function.
Note:
Running the unit in QUIET mode for a long period of time
may cause the room temperature to not reach the set
temperature. If this occurs, cancel QUIET mode and set the
fan speed to a higher setting.
3
COOL Button
In COOL mode, the unit operates in cooling. When FAN is
set to AUTO, the air conditioner automatically adjusts the
fan speed according to room temperature. The will be
displayed during COOL mode.
4
HEAT Button
In HEAT mode, warm air will blow out after a short period of
the time due to cold-air prevention function. When FAN is
set to AUTO, the air conditioner automatically adjusts the
fan speed according to room temperature. The
will be
displayed during HEAT mode.
5 DRY Button
DRY mode is used to reduce humidity. In DRY mode, when
room temperature becomes lower than temp. s2°F,
unit will run intermittently at LOW speed regardless of FAN
setting. The
will be displayed during DRY mode.
6
Tempe/- Buttons
Temp + Every time the button is pressed, the temperature
setting increases.
Temp - Every time the button is pressed, temperature
setting decreases.
The operating temperature range is 60°F-86°F (16°C-30°C).
7 AUTO Button
Under the mode of auto operation, the air conditioner will
automatically select Cool or Heat operation according to
room temperature. When FAN is set to AUTO the air condi
-
tioner automatically adjusts the fan speed according to room
temperature. The
will be displayed during AUTO mode.
8 FAN Button
Fan speed selection
Press the FAN
)$1
button. For each press, fan speed
changes as follows:
Remote control:
LOW MED HI
AUTO
Display
circulated
The air conditioner fan will run according to the displayed fan
speed.
When FAN is set to AUTO, the air conditioner automatically
adjusts the fan speed according to room temperature.
9 Louver SWING Button
Air Flow Direction Adjustment
1. Status display of air flow
COOL/DRY:
HEAT:
2. Left and right air flow adjustment (manual)
Manually move the vertical blade sets on the air conditioner
Remote Controller 1