Hagie STS12i Combo, Руководство пользователя

Страница: 27 / 276

2-7
SECTION 2 –
SAFETY AND PRECAUTIONS
• To release Seat Belt , press the Release
Button (located on the receptacle end)
and allow belt to retract.
ROTATING BEACONS
The Rotating Beacons (located on each
side of the cab) are used for increased
visibility to others. The beacons will
illuminate when the Hazard/Warning Lights
Switch (located on the steering column) is
activated.
NOTE: The Rotating Beacons are active in
both Road and Field mode. The
Hazard/Warning Lights are active in
Road mode only.
EMERGENCY STOP
(E-Stop)
The E-Stop Switch (located on the side
console) provides a quick and positive
method for stopping the engine in an
emergency situation.
When the E-Stop Switch is depressed, it
locks in position and removes the ignition
signal to shut down the engine. To reset the
E-Stop Switch, turn the switch in the
direction of the arrows (located on the face of
the button).
When the E-Stop Switch is activated, a
message will appear on the Machine Display
to alert the operator that the E-Stop is
engaged. Press OK to acknowledge.
NOTICE
Do not use the E-Stop Switch for non-
emergency stopping or as a parking
brake.
Rotating Beacon
(Located on each side of the cab)
-Typical View
E-Stop Switch
(Located on the side console)
-Typical View
E-Stop Active Message
(Located on the Machine Display)