1-2
SECTION 1 –
INTRODUCTION
This manual will aid you in the proper
operation and service of your Nitrogen
Toolbar (NTB). It is the responsibility of the
user to read the operator’s manual and
comply with the correct and safe operating
procedures, as well as maintain the product
according to the service information provided
in the
Maintenance and Storage
section
elsewhere in this manual.
Photographs and illustrations used in this
manual are of general nature only. Some of
the equipment described and/or shown may
or may not be available on your NTB.
Information described in this manual was
correct at the time of printing. Because of
Hagie Manufacturing Company’s continuous
product improvement, certain information
may not be included in this manual. To obtain
the most current operator’s manual for your
attachment, please visit
www.hagiehelp.com
.
Keep this manual in a convenient place for
easy reference, should problems arise. This
manual is considered a permanent fixture of
the product. In the event of resale, this
manual should accompany the NTB.
If you do not understand any part of this
manual or require additional information or
service, contact Hagie Customer Support for
assistance.
SAFETY MESSAGES USED
IN THIS MANUAL
The following safety messages found
throughout this manual alert you of situations
that could be potentially dangerous to the
operator, service personnel, or equipment.
NOTE: A “Note” is intended to make special
mention of, or remark on.
SERVICE AND ASSISTANCE
For service and assistance, please contact:
Hagie Manufacturing Company
721 Central Avenue West
P.O. Box 273
Clarion, IA 50525-0273
(515) 532-2861 OR (800) 247-4885
www.hagiehelp.com
NOTICE
Reference to right and left-hand used
throughout this manual refers to the
position when seated in the operator’s
seat facing forward.
DANGER
This symbol indicates a hazardous
situation which, if not avoided, will result
in serious injury or death.
WARNING
This symbol indicates a potentially
hazardous situation, which if not
avoided, could result in serious injury or
death.
CAUTION
This symbol indicates a potentially
hazardous situation, which if not
avoided, may result in minor or
moderate injury. It may also be used to
alert against unsafe practices.
NOTICE
This symbol indicates operator
awareness, which if not avoided, may
result in personal or property damage.
Содержание NTB Series
Страница 14: ...SECTION 2 SAFETY AND PRECAUTIONS 2 6 650447 Located to the right of the electrical box cover...
Страница 52: ......