Hagie 204SP, Руководство оператора, Страница: 15 / 127

2-1
5
- D
A
SH
/ A
UT
O
SECTION 2 – SAFETY AND PRECAUTIONS
INTENDED USE
Most accidents occur as the result of
failure to follow basic and fundamental safety
rules and precautions. Recognizing potential
safety hazards, following correct and safe
operating procedures described in this
manual, and complying with safety warnings
located throughout the machine may reduce
the risk of accidents.
There is no way to completely eliminate
the potential for danger when operating
agricultural equipment. Therefore, you must
study this operator’s manual and understand
how to operate the detasseler controls for
safe operation before using the detasseler,
its attachments, or any detasseling
equipment. Likewise, never let anyone
operate the machine without proper
instruction.
Do not operate the detasseler, its
attachments, or any detasseling equipment
for anything other than their intended uses.
Hagie Manufacturing Company shall not be
liable for any damage, injury, or death
associated with improper use of the
detasseler, its attachments, or any
detasseling equipment.
Do not make any modifications such as,
but not limited to, weldments, add-ons,
adaptations, or changes from the original
design of the detasseler. Such modifications
may become safety hazards to you and
others and
will void all warranties.
Replace missing, faded, or damaged
safety signs. Refer to “Safety Decals”
elsewhere in this section for correct sign and
placement.
SAFETY PRECAUTIONS
Do Not Bypass Safety Start
• Start the machine from the operator’s
seat only.
Use Caution While Driving
• Before moving the detasseler, ensure no
persons or obstructions are in the path of
travel.
• Do not drive under trees, bridges, wires,
or other obstructions unless there is
adequate clearance.
• Do not permit passengers to ride on
machine while it is moving. Failure to
comply may result in passenger falling off
of machine and/or obstructing the
operator’s view.
• Never drive near ditches, embankments,
holes, mounds, or other obstacles.
• Never drive on hills too steep for safe
operation.
NOTICE
This machine is designed for and
intended to be used for the removal of
tassels from the tops of corn plants. Use
in any other way or for any other purpose
is considered misuse of this machine.