9-16
SECTION 9 –
MISCELLANEOUS
•
Carefully lower the machine to the
ground, which in turn, will allow the leg to
slide outward.
•
Repeat procedure until desired tread
width is obtained.
To Adjust Tread Width In
•
Raise the machine until the tires (on the
side being adjusted) are just off the
ground.
•
Carefully lower the machine to the
ground, which in turn, will allow the top of
the leg to slide in on the mainframe.
•
Re-tighten Leg Mounting Bolts.
•
Re-tighten the Leg Brace Lock Nut.
•
Repeat previous procedure to adjust and
set the legs on opposite side of machine.
NOTE: When finished, all four legs should
be the same distance from the
mainframe.
HANDRAIL EXTENSION -
REMOVABLE
The Handrail Extension may be removed
to access the engine hoods (located on both
sides of machine).
To Remove the Handrail
Extensions
1. Remove the two (2) Handrail Pins
(located on the top and bottom of Hand-
rail Extension).
Tread Width
DIM A
DIM B
120” (304.8 cm)
=
25.5” (64.8 cm)
114” (289.6 cm)
=
22.5” (57.2 cm)
108” (274.3 cm)
=
19.5” (49.5 cm)
90” (228.6 cm)
=
10.5” (26.7 cm)
-Typical View
Содержание 204SP
Страница 2: ...5 DASH AUTO...
Страница 127: ......