hager TXE530, Руководство пользователя

Страница: 51 / 66

TXE530 51 6LE001714A
The aim of the shading function is to provide further comfort for people in the room by preventing glare from the sun. To simplify
the use and configuration of the weather station, we recommend working with facades that are fitted only with shutters or only
with blinds.
The shading control options (blind or louver position and slat tilt positions) are associated with facades.
The weather station is particularly suitable in the following cases:
- The shading function (comfort priority) when people are present.
- Heat recovery and protection (energy saving priority) when the room is empty.
Facade controls
4.7 Shading
The majority of buildings have 4 facades. Creating a separate command for the sun
protection of each facade is recommended.
For U shaped buildings, only 4 facades must be controlled separately, insofar as several
are facing the same direction.
To manage shading on a facade with both blinds and shutters, two facades must be
registered: one for blinds and one for shutters. Here, facade 2 is for shutters and facade 4
is for blinds.
Shading facade 1 deactivation
KNX GPS Weather
station
Shading facade 3 deactivation
Shading facade 4 deactivation
Sun protection facade 1 slat angle %
Shading status facade 1
Sun protection facade 1 position %
Sun protection facade 2 slat angle %
Shading status facade 2
Sun protection facade 2 position %
Sun protection facade 3 slat angle %
Shading status facade 3
Sun protection facade 3 position %
Sun protection facade 4 slat angle %
Shading status facade 4
Sun protection facade 4 position %
Shading facade 2 deactivation
1
4 2
3
1
4 2
3
3 3
2 4
3 1
4
2 2
1 3