6T 7166.a
Usable in all Europe
!
Declaration of conformity :
We, Hager Electro S.A.S., 132 Boulevard de l’Europe
67215 Obernai Cedex, hereby declare under our own
responsibility that the products dealt with by these
instructions satisfy all essential demands linked to the
R&TTE 1999/5/CE Directive dated March 1999.
The BA Controls Quality Manager/ 01-04
Caution:
- This device must be installed only by
a qualified electrician.
- Conform to TBTS installation rules.
- Not to be installed outside.
GB
NL
6T 7166.a
TK301 and TK302 pushbuttons are transmit-
ters that are part of the Tebis installation
system and are designed to remotely control
EIB/KNX bus connected output modules.
They can be used for lighting switch
on/off/dimming control.
Configuration
●
TX 100 : refer to detailed description in
configurer’s instructions (see Dialling of an
input and Assignment of a function)
●
Key(s)
➀
: based on the configuration, it
allows to transmit ON or brightness turn up
order (dimming function)
●
Key(s)
➁
: based on the configuration, it
allows to transmit OFF or brightness
decreasing order (dimming function).
Functions
●
1 or 2 independent radio control channels
EIB/KNX.
●
Battery power supplied
●
Display of transmitted order
●
Display of battery lifetime end.
LED indicator light signals
➂
LED
➂
flashes for 2s after pressing one of the
keys
➀
or
➁
: Product not configured.
LED
➂
switches on for a short time after
pressing one of the keys
➀
or
➁
: Order
received and processed.
LED
➂
flashes for 4s after pressing one of
the keys
➀
or
➁
: Low battery level: replace
batteries as soon as possible.
LED
➂
remains switched off after pressing
one of the keys
➀
or
➁
: Very low battery
level: Battery replacement required.
Battery replacement
Clip off product front face.
Remove both batteries
Press any key
Insert new batteries matching poles
Clip back on product front face.
Installation
2 options are possible for installing product:
●
By screwing (see drilling template), or
●
By taping using double-sided adhesive tape
supplied.
Location and function of the operating display elements
TK 301:
Push-button 1-fold
Enkelvoudige drukknop
TK 302:
Push-button 2-fold
Tweevoudige drukknop
tebis
TP
230V~
Bus
29 V
RF
GB
1
Technical characteristics
●
Supply voltage: 2 x 1,5V AAA - LR03
●
Battery approximate life duration : 5 Years
●
Transmission frequency : 868,3 MHz
●
Dimensions (L x W x D) : 80 x 80 x 15 mm
●
Operating temperature : 0 °C ... +45 °C
●
Storage temperature : -20 °C ... +70 °C
●
Type of protection : IP 20
●
Norms :
EN 60669-1 et EN 60669-2-1
EN 301 489-1 et EN 301 489-3
EN 300 220-1 et EN 300 220-3
1
3
2
60 mm
Fixing diagram