97
4.3. Fault indications
In order not to wake you up, alarms resulting from mains supply problems or dirty
sensors are shut down during the night. Any errors are corrected after daybreak within
10 minutes i.e. 8 hours after the event.
4.3.1. Power fault
If the
audible
power fault
indication
occurs at an inconvenient time, it can be
postponed for 8 hours over a maximum duration of 7 days by pressing the test button
until you hear the first beep.
If the detector is associated with a control panel
, the panel provides vocal
notification following a system command: “
Beep, power fault, detector n° X
”.
4.3.2. Detection head faulty or dirty
When the power fault occurs, the detector continues to operate perfectly
for 30 days. It is advisable to replace the detector as soon as possible.
Detector at the source
of the fault indication
Other interconnected detectors
1 flash every 10 seconds
2 rapid beeps every 60 sec.
2 rapid beeps every 60 sec.
2 flashes every 5 sec.
Detector at the source
of the fault indication
Other interconnected detectors
1 flash every 10 seconds
8 rapid beeps every 60 sec.
8 rapid beeps every 60 sec.
8 flashes every 8 sec.
