GB
20
Contents
1.1 How the detector works
The smoke detector is designed to protect the private areas of apartment buildings,
residential properties and mobile homes.
It can be: • used alone,
• interconnected in a wireless network with 40 detectors maximum.
When something is detected
, this is indicated as follows:
1. Introduction
Detector activated
Other interconnected detectors
Rapid flashing
Triggering of
intermittent
sounding
(85 dB (A) at 3 m)
Triggering of
continuous
sounding
(85 dB (A) at 3 m)
-
1. Introduction ............................................ 20
1.1 How the detector works.................... 20
1.2 Description ........................................ 21
2. Installation .............................................. 22
2.1 Choosing the best place to install
the detector ....................................... 22
2.2 Installing the detector
as a standalone device ..................... 24
2.3 Installing the detector as part
of a network....................................... 25
2.4 Installing the detector as a relay ....... 28
2.5 Testing the detector .......................... 30
3. Using the detector ................................. 31
3.1 Inhibiting the detector ....................... 31
3.2 Stopping the alarm in the event
of non-dangerous detection ............. 32
3.3 Fault indications ................................ 33
4. Maintenance........................................... 34
4.1 Cleaning the detection head............. 34
4.2 Replacing the detector...................... 34
4.3 In case of work in the home.............. 35
5. Technical data ........................................ 35
6. Waranty ................................................... 36
