We reserve the right to make changes of a technical nature
97
Internal system accessories
8.2
Internal system accessories in detail
8.2.1 Flange FZ428 for rear cable entry
As mentioned in chapter 1, the rear cable entry can be sealed with the dustproof flange
FZ428
. To do so, the
rear cable entry must be cut out entirely in the top / bottom part (ideally from the rear prior to mounting the
cabinet on the wall).
The flange panel is installed from the inside of the cabinet. This ensures that the cables are first fed into the
cabinet and from there through the flange.
Cable entry flange FZ428, IP44/IP54
Flange FZ428 installed on the rear of the cabinet
The rear of the plastic top and bottom parts in the cabinet contains also four precuts with a diameter of 29 mm
that can be punched out.
Punch-out points on the rear of the cabinet