We reserve the right to make changes of a technical nature
69
univers Z internal system
7.2.3 Hybrid panels
Hybrid panels are available as accessories. They consist of rows of modules at the top and of mounting
plates at the bottom. Hybrid panels are dedicated only for the mounting in 1-field wide enclosures (especially
when the space at shop floor is not enough for having a Multimedia enclosure 550mm wide) and in 2-field
wide enclosure heights 4, 5 and 6. Those panels are not compatible with vertical partitions UZx0F1 und
UZx0F2. Those partitions have to be mounted on distribution panel side.
The last letters of the product code B and M mean that this panel is dedicated for the surface-mounted field
distributor FWB/FWQ. The following number represents the number of rows for modules at the top of the pa-
nel. For example in the product code UM71M3, M3 means that the product is dedicated for the FWB/FWQ field
distributor and it has 3 DIN rails for modules at the top.
UNx1B1 / UNx1B2 / UNx1B3 / UNx1B4 / UMx1M3 / UMx1M4
The panels UN...1B1 up to ...1B4 and. UM…1M3 up to …1M4 are composed of DIN rails with cover and
PEN-holder with PE or PEN QuickConnect (QC) clamps at the top, a horizontal partition in the middle and
plastic mounting plates UM00M0 at the bottom.
Note: Panels with 1 and 2 DIN rails at the top are equipped with the universal PEN holder KN00A, which is
fixed on the 12 modules wide DIN rail and thus reduces the number of modules that can be mounted on the
rail by 5.
Example: UN41B1
Panels
Height
Width 1 (250 mm)
PEN holder
QC clamp
Mounting plate
UM00M0
1 x DIN rail at the top,
Multimedia field with
plastic mounting plates
at the bottom
4 (600 mm)
UN41B1
KN00A
KN14E
2 x