hager FB LE Series, Инструкция по установке и эксплуатации

Страница: 32 / 59

For your safety
Technical changes reserved 3
DANGER
Dangerous Voltage. An electric shock results in serious
burns and life-threatening injuries and even death!

Disconnect all poles of the device before starting to
dismantle or changing the composition.

Verify the absence of voltage.

Follow the instructions of VDE 0100 for 230 V/AC main
supply.
The product must always be installed and mounted plumb and horizontal!
When putting down component parts, do not place them on the corners and
lay soft material on the storage area first, e.g. transit blanket!
Before starting up, the battery of the smoke detector has to be inserted and
the function has to be guaranteed!
General safety instructions
-
The operating/installation instructions must always be kept at the installation
site of the fire protection housing.
-
Legally required safety instructions must be posted where they are visible to
the users.
-
All safety and hazard information and the nameplate must be kept in a legible
condition.
-
Comply with the applicable VDE regulations.
-
Comply with the requirements of the fire authorities.
-
Comply with the general building law and the building requirements.
-
Comply with the accident prevention directives and the workplace directive.
-
Follow the instructions of the Technical Supervisory Service.
-
Comply with the corresponding standards to evaluate fire protection and
building aspects.
1 For your safety