1
6E 7599.a
-
+
M
EEK001
6E 7599.a
GB
User instructions
Infrared remote control for
settings
Description
LED
Use
Battery replacement
GB
The remote control allows the user to set or
modify settings on the klik PIR occupancy
sensors when the potentiometer is on "auto
test". It allows single and multiple settings.
The SET key is used to send the IR messages
to the occupancy sensors. Multiple settings
can be stored in Memo 1 and Memo 2 and
recalled to set several devices.
Single setting
Example: do a reset.
Multiple settings
Define the parameters to be changed and
press SET to send.
Example: for 25 minutes and corridor use,
press 20', 5' and corridor.
In the case of 2 opposite states the green LED
denotes ON and the red LED denotes OFF
(except Presence/ Absence).
When no function is selected all LED’s are OFF.
+
+
+
-
Occupancy Sensors
standalone
Occupancy Sensors
with pre-wired lead
Occupancy Sensors
with pre-wired lead
and klik.system plug
+
Technical specifications
Power supply : 1x 3V CR2032
Shelf life of battery : 2,5 years
Protection index : IP 30
The acknowledgment LED
blinks during the sending
of the IR message.
