6L
E
00
28
26
A
z
Programmable light
sensitive switch
s
EE110, 04011
Operating principle
The EE110, 04011 programmable light sensi-
tive switch controls light sytems according to
a program set by the user, depending on
natural illumination;
- during the work authorization period,
depending on wheter the measured light
level is below or above the order, it will be
switched on or off.
- during the work banning period, the
contact remains without tension, whatever
the light level is.
The light sensitive switch includes a built
in time delay which avoid unnecessary
switching due to temporary factors such
as car beams etc...
Description
The programmable light sensitive switch EE110,
04011 has two main functions:
• a light sensitive switch comprising:
Override selector switch to allow permanent
setting ON or OFF , auto or test mode.
Lighting range selector
Potentiometer to set light level
Indicator to show output switching.
• a programmer to establish the automatic operating
cycle.
Permanent overrides
the override selector
allows permanent
overrides which have priority on programming
and the measured light level.
permanent override “ON"
permanent override "OFF"
Setting of the working level
the “test” position of the override selector
makes easier the setting of the working level,
it removes the ON and OFF delay.
Select the sensitivity range which suits whith
the application (selector
) :
5 to 100 lux (low light level) applica-
tion examples : public lighting, shop
windows, signals....
50 to 2000 lux (high light level) appli-
cation examples : control of shades.
At the appropriate moment of the day, put the
selector
in “test” position; turn the poten-
tiometer
up to the switching point (the
indicator
lights); put the selector back to
position “auto”, the normal operating mode of
the device.
auto
test
auto
test
Lux
T
6:00
8:00
17:00
23:00
ON
ON
OFF
OFF
OFF
19
18
20
Programming
OFF
ON
Switching dial
Work
banning
period
Work
authorization
period
Time setting
L
N
5
18 19 20
6
9 10
Mounting of the cell
To ensure a good working of the light sensitive
switch, the cell must not be influenced by
artificial light or direct solar radiation and has
to be sheltered from dust and humidity.
In case of disconnection of the link between
the cell and the light sensitive switch, the
output of the device will be switched on.
Make sure the light sensitive switch is unplug-
ged before connecting the cell.
Technical specification
Electrical specification:
- Voltage rating :
230V~+10/-15% 50 Hz
240V~+/-6%
- Consumption :
1,5 VA max.
- Output : 1 voltage free changeover contact
Max. breaking capacity :
- AC1
16A 230V~
Incandescent lamp:
2000W 230V~
- Halogen lamp:
1000W 230V~
- Fluorescent lamp:
- Uncompensated 1:
1000W 230V~
- Compensated in series (10µ): 1000W 230V~
// compensated (15µF):
200W 230V~
- Duo :
1000W 230V~
- Action type:
1B
- Pollution category:
2
- Rated impulse voltage:
4 kV
- Software structure:
class A
- Max. altitude:
2000m
- Upstream protection:
circuit breaker 16A
- Voltage and current declared for the needs
of EMC emissions tests:
230V~ / 0.5A
Functional characteristics:
- 2 sensitivity ranges:
5 to 100 lux,
50 to 2000 lux
- Daily cycle:
- Program setting:
15 minutes increments
- Accuracy:
± 6 min./ annum
- Operating reserve:
at 20°C, 200 h after
beeing connected for 120 h
- ON and OFF delay:
15 to 60 s.
- Working temperature :
-30 °C to +60 °C (cell)
-10 °C to +45 °C (modular device)
- Storage temperature:
- 20 °C to +60 °C
- Protection class (cell):
IP54
- Insulation class (cell):
II
- Independent panel-mounted (DIN rail) control
device
Size:
- Dimension (modular):
5
0
17,5 mm x 5
- Dimension (cell):
32 x 48 x 37 mm
Connection capacity:
- Modular device:
0,5 to 4 mm
2
- Cell:
0,75 to 2,5 mm
2
- Max. lenght between cell and modular
device:
50 m
- Mounting of the cell with 2 screws: Ø 2,5 mm.
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any mate-
rial of manufacturing defect. If any product is found to be
defective it must be returned via the installer and supplier
(wholesaler). The warranty is withdrawn if:
- After inspection by hager quality control dept the device
is found to have been installed in a manner which is
contrary to IEE wiring regulations and accepted practice
within the industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when
returning goods.
z
Warranty
NOT APPLICABLE FOR AUSTRALIA
Correct Disposal of This product (Waste Electrical &
Electronic Equipment).
(Applicable in the European Union and other
European countries with separate collection sys-
tems).
This marking shown on the product or its literature indicates
that it hould not be disposed with other household wasted at
the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste dispo-
sal, please separate this from other types of wastes and recy-
cle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for
details of where and how they can take this item for environ-
mentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes of disposal.
Usable in all Europe
å
and in Switzerland
Load output connection: If load intensity
is >10A use cables with at least a 2.5mm²
diameter
1
6LE002826A
