Operation
Hazardous situation
4
Operation
Operating concept and display elements
In the event of an alarm, the device switches off the electric cooker, hob and informs the user about
the alarm situation via LEDs and acoustic signals. For this purpose, the device has one status LED (5),
three operating buttons (1 ... 3) and sensors (4).
Colour of status LED (5)
Acoustic signal
Function
Green
1
-
Cooker ready for use
Continuously flashing red
Yes
Hazardous situation (pre-alarm)
Slowly flashing blue
Yes, 3 times
Water leakage alarm (optional)
Flashing blue
No
Bluetooth pairing
White
No
Setting mode 1
Flashing purple-blue
No
Setting mode 2
Flashing yellow-green
Yes
Setting mode 3
Flashing white
Setting mode 4 (normal AUX mode)
Flashing red
No
Setting mode 4 (inverted AUX mode)
Continuously flashing red
yes, 3 times
Battery charge too low, battery life still approx. 2 weeks.
Table 1: Meaning of status LED
To avoid false alarms, we recommend:
– Wiping the sensor unit with a damp cloth and mild cleaning agent periodically
– Leaving the sensor unit in its position and avoiding unintended movement
4.1
Hazardous situation
If a potential hazard is determined, a pre-alarm is triggered if necessary. If this is not acknowledged by
the user, the power control unit switches off the power supply to the cooker/hob after 15 seconds. If
the critical situation on the cooker has been remedied, the pre-alarm can be cancelled by pressing the
OK button (3) or the power supply to the cooker can be reactivated.
Pre-alarm has tripped
l
Closely examine the situation on the cooker.
l
Press the OK button (3) if the situation on the cooker is OK.
Pre-alarm has been acknowledged. The cooker is not switched-off.
Switching off the cooker
If the pre-alarm is not acknowledged within 15 seconds, the power supply of the cooker is interrupted.
If there is no danger or if the danger has been remedied, the power supply can be restored by press-
ing the OK button (3).
1
The Status LED (5) lights up in green shortly after pressing the OK button (3).
8