4500/4600 Series Electric Exit Device
Installation Instructions
I-ED00367
Rev 8, Rev Date: 8/27/2018
27390025
Page 1 of 3
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
ELECTRICAL SPECIFICATIONS AND COLOR CODES FOR WIRES
For use with all Hager monitored exit device modifications.
Request to Exit (RX) switch monitors egress by push bar activation of the exit device.
Latch Bolt Monitoring (LM) switch monitors the latch mechanism of the exit device.
Authorized Ingress (AI) switch monitors ingress by trim or key retraction of the exit device latch.
Request to Exit (RX)
Latch Bolt Monitoring (LM)
Authorized Ingress (AI)
Electrical
Specification
SPDT Monitoring Switch
Maximum Contact Rating:
3 AMP @125VAC
2 AMP @ 30VDC
SPDT Monitoring Switch
Maximum Contact Rating:
3 AMP @125VAC
2 AMP @ 30VDC
SPDT Monitoring Switch
Maximum Contact Rating:
3 AMP @125VAC
2 AMP @ 30VDC
Color Code
for wires
Yellow Wire – Common
Red Wire – Normally Open
Grey Wire – Normally Closed
Wire Gauge – #22 AWG
Black Wire – Common
White Wire – Normally Open
Red Wire – Normally Closed
Wire Gauge – #22 AWG
Black Wire – Common
Orange Wire – Normally Open
Purple Wire – Normally Closed
Wire Gauge – #22 AWG
WIRE ROUTING AND DOOR PREP INSTRUCTIONS
1.
Follow exit device instructions and template to prepare door and frame for installation.
2.
Door fabricator to provide a 3/8” ** diameter (minimum) raceway through door to allow insertion of
electrical wires running between exit device and power transfer device (electric hinge).
Door fabricator to provide a
3/8” ** diameter (minimum)
Raceway through door to
Allow insertion of electrical
Wires running between exit
Device and power transfer
device
**
DEVICES COVERED IN THIS DOCUMENT:
LM – Latch Bolt Monitoring *
DE – Delayed Egress
ELR – Electric Latch Retraction (not for use with Mortise Exit)*
AI – Authorized Ingress *
RX – Request to Exit (Field Installation Kit 2-649-5001) *
RX2 – Dual Request to Exit
ED – Electric Dogging *
ET – Electric Trim (4500 Series only)
EL or EU – Electrified Mortise Trim (ordered with 4501N Exit) *
OBDE-On-Board Delayed Egress
MLR – Motorized Latch Retraction (Field Installation Kit 2-649-5007) *
* Quick Connects Optional
** Quick Connects Require 5/8” Raceway
