14. Read and observe all the important notices on the
appliance.
15. If an extension cord is necessary, an electrical
cord with a proper rating should be used. An electri-
cal cord rated for less amperes or watts than the
appliance rating may overheat. Care should be taken
to arrange the cord so that it will not be tripped over
or pulled.
16.
SAVE THESE INSTRUCTIONS
INSTALLATION and OPERATION
See illustrations on pages 15-17.
CAUTION: Disconnect the electrical plug of all appliances
inside the aquarium before putting hands into the water.
Fluval 1 Plus
It is recommended that the foam pad is rinsed before the
first installation.
1.
Remove the filter motor from the filter casing.
(A)
2.
Insert the suction cup into the slot directly below the
electrical cord adjacent to the magnetic impeller.
(B)
3.
Put the filter motor back on the filter case.
(C)
4.
Insert second suction cup into the keyhole near the
bottom of the filter case.
(D)
5.
Place the filter in the aquarium using the suction cups,
ensuring that the horizontal water outlet is at a mini-
mum of 1 cm below the water surface.
(E)
6.
Plug into power source.
(F)
Fluval 2, 3, 4 Plus
It is recommended that the foam pads are rinsed before the
first installation.
1.
Attach suction cups to the suction cup bracket.
(A)
2.
Slide the Hose Adapter/Airflow Control Venturi Nozzle
AquaClear
AquaClear
!
3
