732.28.424
HDE 26.07.21
9/12
en
3.2 Standalone Mode with Remote Control as Provisioner
When using the Remote Control as Provisioner for the Standalone Mode, the 4-Channel Interface can be added as a
provisioned device.
3.2.1. Remote Control Standalone Mode functions 4-Channel Interface
The 4-Channel Interface will be added when the Remote Control is searching for new devices in the Standalone
Mode. This happens when the Remote Control is searching for Mesh Boxes to be provisioned (with Monochrome-,
Multi-White- or RGB-Lights), as described in section 3.2 of the Remote Control technical documentation.
Provisioning the 4-Channel Interface using the Standalone Mode of the Remote Control will provision the 4-Channel
Interface with the following described functions:
The 4-Channel Interface behaves as group 7 on the Remote Control
Group 7
Scene A
Scene B
Scene C
[image 6]
Button
Group or Scene
Action
Upper Left
Group 7 (All Lights) On/Of
Toggle On/Of (click) Dimm (long press)
Upper Right
Scene A (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Left
Scene B (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Right
Scene C (of all lights)
Trigger Scene (click) Dimm Group (long press)
