Haes ESPRIT-G, Инструкция по установке, пусконаладке и эксплуатации

Страница: 53 / 88

ESPRIT Gas Extinguishing User Manual CONFIGURING THE PANEL
53
Approved Document Ref: UI-ESG-01 Issue 2.0
CONFIG Menu
Accessible from the Main Menu (Access level 2); the CONFIG Menu (Access level 3), and its
subsequent sub-menus, are used to configure the panel and its attached devices. The sub-menus
available are:
•
CONFIG
o
PANEL
▪
LEARN
▪
OPTIONS
▪
DEFAULT
▪
PASSWORD
o
GAS Card
o
Devices
▪
Zones
▪
SOUNDERS
▪
RELAYS
o
P-BUS
o
PSU
To access the CONFIG menu:
•
Turn Activate Controls key clockwise to On
or
•
Use the keypad to enter Authorised User (Access level 2) code 1111:
o
Press
✓
key
o
Use Up/Down arrow keys to increase/decrease the number value
o
Use Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 1111, press the
✓
key again
o
The Main Menu will become available for operation
Note: Access level 2 Menu will deactivate after 30 sec if not used.
•
On the Main Menu , use Left/Right arrow keys to move cursor to CONFIG menu icon
•
Press
✓
key to select CONFIG menu. The digital display will show the following message:
Enter Level 3 Access Code
•
Use the keypad to enter code 3333:
o
Press
✓
key
o
Use the Up/Down arrow keys to increase/decrease the number value
o
Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 3333 press
✓
key once again. The
Access level 3 menu will become available for operation.