P/N 53063-30, Manual revision: B
8-9
Using Data Acquisition Features
Working with the Transfer Data function
The Transfer Data screen display will allows the operator to transfer the
recorded information for a selected procedure to an output device
connected to the CS5+ device. When it is selected from the off-line data
acquisition menu, the following information will be displayed:
Figure 8-8, Example of the Transfer Data screen display
The procedures available in the CS5+ memory which have been referenced
by patient ID (if entered), date and start time will be listed. If no patient was
ID was entered, the corresponding area will remain blank.
The upper portion of the screen display lists two options:
!
Procedure #:
this selection allows the operator to determine which
procedure information to send to the output device.
!
Device:
this selection will format the data according to the require-
ments of the connected output device.
The operator can work with the displayed information as follows:
"
Press the Select key to switch between
Procedure #
or
Device
.
"
Use the Arrow keys to highlight one or all of the available procedures.
"
Press the Start key to initiate the transfer of data.
The following message will be displayed during the transfer of data to the
output device:
The following message will be displayed once the transfer has been
completed:
!"#!L1!;;;@B!
J,0U
!9UM9U!cc>
!MP;;
1"#!L9!;>!!9;
J,0U
9UM9U!cc>
!BP!9
9"#!L9!;>M>!!
O&3U
>UM9U!cc>
19PM>
;"#
D*?U
@UM9U!cc>
cP!c
>"#!Lc!MMM!;1
C%/U
BUM9U!cc>
BP91
@"#!ML119cLB>
A?0U
!cU!9U!cc>
1!PM!
B"#M!LL1>L!!c
J,0U
1MUM9U!cc>
LP!;
L"
D?&U
1!UM9U!cc>
!MP;c
c"
O&3U
11UM9U!cc>
cP9;
!M"#
O&3U
11UM9U!cc>
!9P;B
$%&88#E22IO#Z&48#),#.*(0=&#T(-?&8"
$%&88#ADE2D#),#)%(08V&%#3()(#),#%&5,)&T/.&"
R&T/.&P
$+!c1MM
D%(08V&%#3()(
$%,.&3?%&#b
!
H'-9&?%'+*9+/')6'%&&
H'-9&?%'+4)./8%0%
