Haemonetics BloodTrack Kiosk V5, Руководство по установке

Страница: 77 / 81

BloodTrack Kiosk® V5 Installation Guide
HAE: SM-BloodTrack-08(AA) SBC100xxx
GBE: 2000-JNB0012 65
B.2.3 IEC 60601-1-2, Table 204
The BloodTrack Kiosk V5 is intended for use in the electromagnetic environment
specified below. The customer or operator of the BloodTrack Kiosk V5 should
ensure that it is used in such an environment.
IEC 60601-1-2, Table 204
Guidance and manufacturer’s declaration―electromagnetic immunity
Immunity test IEC 60601 test level Compliance level
Electromagnetic environment
–
guidance
Portable and mobile RF communications
equipment should be used no closer to any
part of the BloodTrack Kiosk V5, including
cables, than the recommended separation
distance calculated from the equation
applicable to the frequency of the transmitter.
Conducted RF
IEC 61000-4-6 3 Vrms
0,15 to 80 MHz 10 Vrms
0,15 to 80 MHz
Recommended separation distance:
d =
P 35 , 0
Radiated RF
IEC 61000-4-3 3 V/m
0,08 to 2,7 GHz 10 V/m
0,08 to 2,7 GHz
Recommended separation distance:
d =
P 35 , 0
from 80 to 800 MHz
d =
P 7 , 0
from 0,8 to 2,7 GHz
Where P is the maximum output power rating
of the transmitter in Watts (W) according to
the transmitter manufacturer and
d is the
recommended separation distance in meters
(m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site
surveya, should be less than the compliance
level in each frequency rangeb.
Interference may occur in the vicinity of
equipment marked with the following symbol:
❖
NOTE:
At 80 and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.