5.52.194.00.01.04
11
at
commissioning
daily
checks
1st maintenance
after
3 months
Inspection
Maintenance
every
3 months
Inspection Mainte-
nance
every
12 months
Check screw connections
X
X
Check lifting, lowering functions.
X
X
Check brake function
X
X
for ratchet lever hoists: Check free-wheeling mechanism of the
chain
X
X
Brake - check wear of brake lining
X
Check chain wheels, ratchet wheels and pawls.
X
Clean and lubricate the load chain.
X
X
X
Check the load chain for elongation and wear
X
Check the load hook for cracks and deformation
X
Load hook - check the safety catch
X
X
Check and lubricate the bearing of the chain pulleys.
X
X
Check the chain pulleys
X
X
Have the equipment checked by a qualified person
(periodic inspection)
X
Pos : 16.3.2. 2 /1_H ADEF /---ALLG EMEIN/Hinweis e/ Kett enz üge/WARNUN G - I ns pektion: Über,-unt ersc hreit en Maß e-Ket ten,H aken @ 0\ mod_1177504456674_52.doc x @ 5496 @ @ 1
WARNING!
If one or several of the dimensions fall below or exceed the dimensions in the table, or if cracks or
corrosion are found, the parts must be replaced with original spare parts.
Pos : 16.3.3. 1 /1_H ADEF /13-PRÜFUN G/ Kett enz ug/ Las t kett e/ Last kett e - M aß er klärung @ 0\ mod_1173261324103_52. doc x @ 492 @ @ 1
12.2
Checking the load chain
acc. DIN 685-part 5
L11 = pitch increase over 11 chain links
L1 = pitch increase over 1 chain link
dm = detected link thickness
Illustration 5
Pos : 16.3.3. 2 /1_H ADEF /13-PRÜFUN G/ Kett enz ug/ Las t kett e/T abelle - Ket ten 4x12 - 5x15 - 6x18 - 8x24 - 10x30 @ 3\ mod_1374821195086_52. doc x @ 27310 @ @ 1
Chain dimensions
Dimensions
mm
Chain size
4x12
5x15
6x18
8x24
10x30
L11
136,6
170,6
203,94
272,1
340,7
L1
12,7
15,7
18,9
25,3
31,8
dm
3,6
4,5
5,4
7,2
9,0
Pos : 16.3.3. 3 /1_H ADEF /---ALLG EMEIN/Hinweis e/ Kett en/ WARNUNG - Ket ten: Bei Erreic hen der Tabellenmaß e durc h Verschl eiß oder Verf or mung die Ke @ 0\mod_1178705158838_52. doc x @ 5763 @ @ 1
WARNING!
When the dimensions listed in the table are reached due to wear or deformation, the chain must be
replaced!
Pos : 16.3.4. 1 /1_H ADEF /13-PRÜFUN G/ Kett enz ug/ Las thaken/Las thaken - Maß er klär ung - X-Y-H @ 0\ mod_1182346659653_52. doc x @ 6318 @ @ 1
12.3
Checking the load hook
Load hook
X = measuring distance hook mouth width
Y = measured length from hook no. 6
H = thickness of hook saddle
Illustration 6
Pos : 16.3.4. 2 /1_H ADEF /13-PRÜFUN G/ Kett enz ug/ Las thaken/Tabelle - Hakenmaß e - 9/+ 24/12 @ 3\ mod_1338381630953_52. doc x @ 21777 @ @ 1
Table 1
Dimension
mm
Capacity
500 kg
1000 kg
1500 kg
2000 kg
3000 kg
5000 kg
10000 kg
20000 kg
X or Y
27/35
33/45
33,5/47
37/52
43,5/62.5
51/79
64/-
82/-
H
16,8
21
25,5
28,3
35,6
43,2
60,4
84,8
Dimensions in the tables are theoretical values without tolerances.
Please fill in the measured
values before putting into
operation:
Capacity
kg
X or Y
mm
H
mm
Pos : 16.3.4. 3 /1_H ADEF /---ALLG EMEIN/Hinweis e/H aken/ VO RSICH T - H aken bei Verf ormung... . @ 0\ mod_1177582461489_52. doc x @ 5510 @ @ 1
CAUTION!
When the dimension of hook opening width is deformed more than 10% or when the dimension of the hook
bottom thickness is fallen short of by 5% due to wear, the hook must be replaced.
Pos : 16.3.5 /1_H ADEF /13-PRÜFUN G/ Kett enz ug/ Sperr klinke/T abelle - 8/+9/+24/+ 240/ 12 @ 3\ mod_1338376989692_52.doc x @ 21726 @ @ 1
