HADEF 62/05 S, Инструкция по установке, эксплуатации и обслуживанию для установщика и пользователя

Страница: 11 / 25

5.52.420.00.01.09 11
CAUTION!
The distance "X" between the wheel flanges of the trolley wheels must exceed the flange width "B" of the
beam by 2-3 mm (1-1,5 mm each side).
WARNING!
The hoist must always hang centrally under the beam or under its suspension point.
6.4 Pedant control installation
The pendant control is supplied with strain relief cable
1 Locking screw
2 Retaining plate
3 Strain relief cable
4 Connector plug
5 Locking clips

Unscrew the locking screw (1) incl. the
retaining plate (2).

Screw the strain relief cable (3) behind the
retaining plate (2) tightly to the casing with the
locking screw (1).

Plug in the connector (4) and lock it with the
locking clips (5).
Illustration 4
6.5 Chain container installation
1 Chain container
2 Bolt
3 Safety clamp

suspend chain container (1)

fix it by bolts (2) at the provided hole of box
and housing

protect it with safety clamps (3)
Illustration 5
CAUTION!
If this is not observed it may damage the chain feed-in.
6.6 Tools
Tool Use
Load bar
1
2
3
4
5