HADEF 240/12, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 17

5.52.145.00.01.05 15
13.2 Pulleys
13.3 Load hook

Check bearings and pulleys yearly

Clean and lubricate the bearings of hooks and pulleys with grease

Slight bearings are maintenance free

When bearings resp. slight bearings are worn of, change the complete pulley
13.4 Gear
Regular checks of lubrication are necessary. The teeth must be cleaned and re-lubricated after approx. 3
years. We recommend to use a lubricant of class EP2 or similar products. In case of severe conditions of
use (e.g. dust, regular lifting of the nominal load,etc.), please shorten maintenance intervals.
13.5 Trolley

Trolleys are lifetime lubricated, Refill lubricant is normally not necessary.

Lubricate gear rim and pinion drive each ¼ year or if required more often, with grease.
13.6 Gear spring pressure brake
During the check, brake lining wear is verified. The brake linings must be replaced when the wear limit is
already reached at one position of the lining, - as this can be the case when wear of the linings is irregular.
CAUTION!
The brake linings must be free from fracture. Avoid oil, grease, dirt and humidity on the brake linings as this
increases wear.
13.7 Lubricant - Selection
FUCHS SHELL ESSO MOBIL TOTAL CASTROL KLÜBER
Renolit FEP 2 Alvania EP 2 Unirex EP 2 Mobilux EP 2 MULTIS EP2 -- --
Stabylan 5006 -- -- -- -- Optimol Viscoleb 1500 Klüberoil 4UH 1-1500
-- -- -- -- -- -- Wolfracoat 99113
Chain lubricant OKS 451
Use Recommendation Interval
Pulleys
FUCHS
RENOLIN PG220
Acc. to demand 12 month
Use Recommendation Interval
Load hook
bearing
FUCHS
RENOLIN PG220
Acc. to demand 12 month
Use Recommendation Interval
Pulleys
Gear rim
Drive pinion
FUCHS
RENOLIT FEP2
0,1 kg 3 month
Travelling gear
If available
SHELL
Tivela S320
---
Life time
lubrication