12
5.52.624.01.01.00
108/22
For rope exits at certain angles, individual rope slip off guard can be moved or removed.
up to 1000kg
from 2000kg
To prevent the rope from slipping off when slack, the rope must be guided under at least one rope slip off
guard.
6.3
Tools
108-22
7
Control
Only people that are familiar with the operation of the lifting devices and cranes may be entrusted with their
operation. They must be authorized by the employer for the operation of the equipment. The employer must
ensure that the operating instructions are available near the equipment and that they are accessible for the
operating personnel.
Only use wire ropes, that do not exceed the maximum permitted diameter.
Put the wire rope properly on the pulley and ensure that the rope rests on the groove base.
Check screw connections.
8
Commissioning
8.1
General
The operator of the unit is responsible for the entire system.
According to the Ordinance on Industrial Safety and Health, a hazard analysis must be carried out by the
operator.
Observe the respective national standards, regulations and directives of the responsible bodies at the place
of operation.
NOTICE!
Hoists up to 1000 kg capacity and without motor-driven trolleys of hoisting unit must be tested by a
“qualified person” before putting into operation for the first time.
Hoists of 1000 kg capacity and up or with more than one motor-driven hoist movement; i.e. lifting and
trolley movement, must be
tested by a “licensed qualified person” before putting in operation.
An exception is “hoists ready for operation” acc. validated national regulations with EU-declaration of
conformity.
capacity
tool
size
usage
250kg
– 500kg
M6
axial securing
Rope slip off guard
1000kg
M8
2000 - 5000kg
M10
12500kg
M16
20000kg
M20
