Cleaning and Maintenance/ Disposal/ Service and Support
Seite 35 von 38
QSL-T/QST-150-25/45 V3
Standard
Original operating manual
Rev1.1
5. Cleaning and maintenance
WARNING
Before cleaning or maintenance work, the motor must be shut down and secured against
unintentional restart.
If necessary, the motor can be cleaned with compressed air or a dry cloth.
6. Disposal
This product is marked in accordance with the European Directive 2012/19/ EU on waste
electrical and electronic equipment and must note be disposed of with household waste. To
return your old device, please use the return and collection systems which are available to
you.
You can also return your old device after use to your specialist supplier.
7. Service and Support
If questions occur despite professional handling and observance of all the information in the
operating instructions, please contact our service department by phone or email.
Please send repair shipments with a fully completed repair order to:
Hacker Motor GmbH
Schinderstraßl 32
D-84030 Ergolding
Telefon:
+49-871-953628-0
Fax:
+49-871-953628-29
Internet:
E-Mail:
The form for repair orders and our support times can be found online at:
www.hacker-motor.com/service-support
HINT
Do not clean the motor with water or wet objects. This can permanently damage the motor.
