Hach TenSette plus, Основное руководство пользователя

Страница: 8 / 172

Option Description
Program Select the program number from 1 to 9. Default volumes: 0.2, 0.4, 0.5, 1.0, 1.3, 2.0,
2.3, 2.5, 5.0 mL
Options Calibrate : Calibration mode. Select between:
• Two points: two points calibration.
• One point: one point calibration.
• Counter: Displays number of pipettings since last calibration.
Service : The piston can be disconnected and reconnected in Service mode. Refer to
Maintenance on page 9.
Name : This function enables user to set a name for the pipette. The name is always
shown on the display when the pipette is in sleep mode. To change the default
name:
1. Choose Name from the menu and select Edit . The first digit starts to flash.
2. Change the digit with the scroll key. Move to the next digit with OK . When the last
digit is accepted the name is changed.
Power : With this function the power can be turned off. Pressing any key turns on the
power.
Buzzer : The buzzer can be turned on and off with this function.
Version : The software version is displayed.
Backlight : Turn on/off the backlight.
Figure 3 Pipette operation
1 Speed indicator 4 Function 7 Scroll Key
2 Battery indicator 5 Speed-in/-out 8 Tip Ejector Lever
3 Volume indicator 6 Right Selection Key 9 Left Selection Key
Section 7 Operation
W A R N I N G
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
8 English