HACH Company
PO Box 389 • Loveland CO 80539
Phone: 970/669-3050 • Fax: 970/669-2932
Website: www.hach.com
HACH LANGE GMBH
Willstätterstraße 11 • D-40549 Düsseldorf • Germany
Tel. +49 (0)211 52 88-0 • Fax +49 (0)211 52 88-143
www.hach-lange.com
DOC012.98.00788
Quick Reference Guide
TenSette plus BBP087
Important Note:
This Guide is only valid in conjunction with the complete manual DOC022.98.00744.
System Start Up
1.
Connect the plug of the charger to the socket on the back of the pipette (
, item
). Connect the
charger to an AC wall socket.
Note:
You can use the pipette while the charger is connected.
2.
Press the trigger (
) to turn on the pipette.
3.
After 30 minutes without usage the pipette switches to the sleep mode. Press
MENU
→
OPTIONS
→
POWER
→
POWER OFF
to switch off the pipette.
Operation
Setting of the pipetting volume
1.
Choose the
PIPETTE
function (
MENU
→
PIPETTE
).
2.
Select the volume by pressing the scroll key (
, item
) up or down. Accept the volume with
OK
.
Setting of the pipetting speed (optional)
1.
Select
SPEED
(default
6
,
1
slow –
9
fast). The speed-in starts to blink.
2.
Select the speed-in with the scroll key (
, item
) and accept with
OK
. Then select the speed-out with
the scroll key and accept with
OK
.
Pipetting
1.
Dip the tip (Cat. No.
BBP068
) under the surface of the liquid. Press the trigger (
drawn in to the tip.
2.
To deliver the liquid press the trigger.
3.
Change the tip and continue pipetting.
Note:
For the convenient usage of HACH LANGE cuvette tests, the nine most frequently used volumes are pre-programmed
(
MENU
→
PROGRAM
→
PROG 1-9
).
Figure 1 TenSette plus BBP087
1
Battery
indicator
7
Function
2
Volume
indicator
8
Speed in / out
3
Right Selection
Key
9
Speed indicator
4
Scroll Key
10
Charger Socket
5
Tip Ejector
Lever
11
Trigger and
finger rest
adjustable
6
Left Selection
Key
12
Trigger
© Hach Company, 2007. All Rights Reserved.
Edition 1, January 2007 ck/sk
