Hach AutoCAT 9000 Скачать руководство пользователя страница 30

Страница: 30 / 176

Basic Operation

Basic Operation
Page 28

50081_Operation.fm

3.3.4 Set the Time

Highlight Time.

Press the

CHECK MARK

to confirm the selection.

Input the hour (00 to 23). Press the

RIGHT

key to scroll to minutes.

Input the minutes (00 to 59). Press the

RIGHT

key to scroll to seconds.

Input the seconds (00 to 59). Press the

CHECK MARK

to validate and return to the

Configuration Menu.

Note:

Press the

LEFT

arrow to access a previous field.

3.3.5 Set the Date

Highlight Date.

Press the

CHECK MARK

to confirm the selection.

Input the day (1 to 31). Press the

RIGHT

key to scroll to Month.

Select the month using the

DOWN

key. Press the

RIGHT

key to scroll to Year.

Input the year (2000 to 2069). Press the

CHECK MARK

to validate and return to the

Configuration Menu.

Note:

Press

to access a previous field.

3.3.5.1 Select Optional PC Keyboard

Select an optional, external keyboard to connect to the 6-pin PS/2 receptacle located on
the right hand side, bottom edge of the instrument.

Scroll to highlight PC Keyboard.

Press the

CHECK MARK

to confirm the selection.

Press the

DOWN

key Highlight English (US) for a standard, QWERTY-type

keyboard.

Press the

CHECK MARK

to validate and return to the Configuration Menu.

Note:

When using the optional keyboard, press F12 to enter the Setup menu. This is done by

pressing the Fn and F2 keys simultaneously.

3.3.6 Selecting the ac Power Frequency

Select the ac power supply frequency (50 Hz/230 V ac or 60 Hz/115 V ac) to optimize
instrument operation for regional power.

Highlight AC Power Frequency.

Press the

CHECK MARK

to confirm the selection.

Press the

DOWN

key to highlight the desired setting.

Note:

The default, 60-Hz /125-V ac setting is required for operation in the U.S. and Canada.

Press the

CHECK MARK

to validate and return to the Configuration Menu.

Содержание AutoCAT 9000
















































































































































































Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды

Hach AutoCAT 9000, Инструкция по эксплуатации

Результаты поиска

Содержание AutoCAT 9000

Отзывы:

Бренды по названию

Популярные бренды