manualshive.com logo in svg

Hach 5740sc, Руководство пользователя, Страница: 7 / 50

Поделиться
Скачать
Hach 5740sc Скачать руководство пользователя страница 7

7

Section 2

General Information

2.1 Safety Information

Please read this entire manual before unpacking, setting up, or operating this equipment. 
Pay attention to all danger and caution statements. Failure to do so could result in serious 
injury to the operator or damage to the equipment. 

Do not use or install this equipment in any manner other than that specified in this manual. 

2.1.1 Use of Hazard Information

DANGER
Indicates a potentially or imminently hazardous situation which, if not avoided, 
could result in death or serious injury.

CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate 
injury.

Important Note: Information that requires special emphasis.

Note: Information that supplements points in the main text.

2.1.2 Precautionary Labels

Read all labels and tags attached to the instrument. Personal injury or damage to the 
instrument could occur if not observed

2.2 General Sensor Information 

The Galvanic Membrane Dissolved Oxygen Sensor allows aqueous samples to be easily 
and accurately analyzed for dissolved oxygen concentration. The system consists of a 
controller with an integrated display and a sensor for in-situ measurement. 

The sensor can be using the sc100 (

Section 4 on page 13

) or sc1000 controller.

Optional equipment, such as mounting hardware for the probe, is supplied with 
instructions for all user installation tasks. Several mounting options are available, allowing 
the probe to be adapted for use in many different applications. 

Typical applications include aeration basins, nutrient removal in equalization basins, 
aerobic and anaerobic digesters, effluent streams, rivers, lakes, and fish ponds.

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.

This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical shock and/or 
electrocution exists.

This symbol, if noted on the product, indicates the need for protective eye wear.

This symbol, when noted on the product, identifies the location of the connection for Protective Earth (ground).

This symbol, when noted on the product, identifies the location of a fuse or current limiting device. 

客服：400 688 9809 

Содержание 5740sc



















































Отзывы:

Нет отзывов