Hach Ultra ORBISPHERE 510, Руководство оператора

Страница: 47 / 144

Orbisphere 510/511/512 Analyzers - View Menu 41 of 138
Operator Manual
ORBISPHERE
3.2.2 Statistic View Configuration
3.2.3 Diagnostic View Configuration
On the left side of the screen, select the channel to be
displayed in the statistic window, and press OK.
To configure the statistic view for a channel, select the
channel number in the right side of the window, to take
you directly to the configuration window.
Scope:
Number of values: Statistic calculation range (from 10
to 10,000 values). Number of values taken in
consideration in the log file since the last value stored.
The recorded values with alarms are not considered
for calculation, but are part of the log file.
Histogram:
Upper limit: Select High or High High alarm value, or a
custom value.
Lower limit: Select Low or Low Low alarm value, or a
custom value.
Capability:
Upper limit: Select High or High High alarm value, or a
custom value.
Lower limit: Select Low or Low Low alarm value, or a
custom value.
Select the channel to be displayed in the diagnostic
window, and press OK.