Hach Ultra ORBISPHERE 3624, Руководство оператора

Страница: 56 / 102

50 of 96 PC Program Setup - 3624 ProBrix Plus
Operator Manual
ORBISPHERE
End of Run is defined as any occurrence when:
• A product is changed using the Product button
• The run is stopped using the End button
• The Line is closed
• The program is terminated
The product measurement data is saved to file each time the selected interval is
reached.
4.2.6 Water Calibration Status
For Diet measurements only, it may be desirable to perform a water density calibration
periodically. This can be conveniently done during a long rinse-down period. To enable
this calibration, select the
Water Calibration Status
option, and turn the status to
On
.
4.2.7 Alarms Delay
Selecting the
Alarms Delay
option and entering a value of between 0 and 30 will
override this default to the new value.
4.2.8 Sound Alarms
The ProBrix PC Program can trigger audible alarm messages. To receive these
messages on your PC, it must be equipped with speakers and have a sound card
installed.
Define the alarms for which an audible alarm is heard, by selecting the
Sound Alarms
option and ticking the required boxes. This signals an audible warning message when
that specific event occurs.
System alarms are disabled each time a new run is
started or when the
Alarms ON/OFF
button is selected.
The ProBrix Plus PC Program automatically re-enables
these after a delay period of 5 minutes.
Fig 4-8:
Alarms Delay Screen
Fig 4-9:
Sound Alarms Screen