Hach Ultra MET ONE HHPC-2, Руководство пользователя, Страница: 18 / 42

17
Operation
4.3.2 Screens
Press the corresponding button from the keypad at the bottom of the LCD to invoke the
following screens:
• Main screen—The main screen displays:
• Channel sizes
• Particle counts (only displayed when counting or in Buffer mode)
• Status of the counting process (Run or Wait)
• Battery charge indicator (amount of charge remaining in the battery, refer to Table
4 on page 25 )
• Select mode screen
• Select volume screen
• Buffer count and Buffer options screen
• Display buffer screen
• Contrast screen
• Date and Clock setup screen
4.4 Configuration setup
Once the MET ONE HHPC–2 is unpacked and connected to the appropriate intake
device, use the default settings to conduct a 1-minute count cycle. Download the data to
a PC and print the results.
To perform a 1-minute count cycle:
1. Remove the isokinetic probe cover (black plastic cap).
2. Press and hold the
POWER
key until the MET ONE HHPC–2 sounds two beeps and
turns on.
3. Press
START/STOP
on the Main screen to start counting. The count cycle begins and
the bottom line of display changes from “Wait” to “Run”. After one minute, the count
cycle ends and the display clears.
Note: The results are saved automatically in the print buffer.
Refer to section 4.8 on page 22 to transfer the data to a PC and print the results.
4.5 Select custom settings
To choose a setting, select an option that is displayed at the bottom of the Main screen
when the
MODE
key is pressed, then use the
START/STOP
and
MODE
keys to scroll
through the options or save selections.
4.5.1 Set the date and time
To set the date and time:
1. Press the
MODE
key six times on the Main screen. The bottom line displays the time
and date.
2. Press and hold the
MODE
key for one second until two beeps are heard. The Date
and Time screen is displayed with the date selected.
3. Use the
MODE
key to select the digit. The cursor moves to the next digit.