HABONIM AFH24 Скачать руководство пользователя страница 1

Installation, Operating & Maintenance
2-Piece High Pressure Ball Valves
Series included:

H24, AH24X, AFH24

Sizes included:

1⁄2” – 11⁄2” (DN15-DN40)

  

WARNINGS & SAFETY INSTRUCTIONS

Habonim cannot anticipate all of the situations a user may encounter while installing and using Habonim valves. The user 

MUST

 

know and follow all applicable industry specifications on the safe installation and use of these valves.  Misapplication of the 
product may result in injuries or property damage. Refer to Habonim product catalogues, product brochures and installation, 
operating and maintenance manuals for additional product safety information or contact Habonim.   

1. 

Keep hands and objects away from the valve ports at all times. Actuated valves could be accidentally operated, resulting in 
serious injury or valve damage.

2. 

Before removing a valve from the line, always make sure the line has been depressurized and drained. Cycle the valve a few 
times to relieve any pressure that could be trapped in the body cavity.  

3. 

Utmost caution must be taken when handling a valve that has toxic, corrosive, flammable or a contaminant nature media 
flowing through its pipeline. The following safety precautions are recommended when dismantling valves with hazardous 
media:

a. 

Wear eye shield, protective headgear, clothing, gloves and footwear.

b. 

Have available running water.

c. 

Have a suitable fire extinguisher when media is flammable.

4. 

Do not try to operate a valve that exhibits any sign of leakage. Isolate the valve and either repair or replace it.

5. 

Do not use or substitute non Habonim components or parts in Habonim valves and assemblies.

1. GENERAL

This Installation, Operating & Maintenance manual present the instructions required for safe use of Habonim 2-piece High Pressure, 
reduced bore ball valves type H24 series. Before using any of these valves, read the entire IOM carefully and make sure you understand 
everything. Where in doubt, please consult with Habonim engineering team.             

Inspired By Challenge

Habonim ISRAEL

Tel: +972-4-6914911 / 6914903

Fax: +972-4-6914935

[email protected]

Habonim USA

Toll Free Phone: 1-866-261-8400

Toll Free Fax: 1-866-243-9959

[email protected]

Habonim China

Tel: + 86 21 64453190 *146

Fax: + 86 21 64453191

[email protected]

Habonim UK

Tel: +44-1633-484554

Fax: +44-1633-482252

[email protected]

Habonim Australia

Tel: +61 3 9556 5428

[email protected]

I-H24-12/15

Содержание AFH24







Отзывы: