Habasit PMR-07 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 68

Habasit PMR-07 Скачать руководство пользователя страница 34

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

OPERATION

Edition: 04/2006

Page

D-2

Replaces: 10/2005

D.1

GENERAL WARNINGS

The operator and/or maintenance technician must use the equipment in the manner described

in this manual and must avoid creating situations that could cause danger to persons who may

come into contact with the equipment or things connected to it.

IMPORTANT

THE INFORMATION DEVICES (SIGNS) AND SAFETY NOTICES MUST BE KEPT CLEAN AND

LEGIBLE.

ATTENTION

DO NOT IN ANY WAY ALTER THE EQUIPMENT'S SAFETY SYSTEM.

ATTENTION

IT IS ABSOLUTELY FORBIDDEN TO REMOVE THE PROTECTIVE DEVICES INSTALLED ON THE

REGULATING UNIT.

ATTENTION

CARRYING OUT CLEANING AND MAINTENANCE JOBS WHILE THE SYSTEMS ARE LIVE IS

ABSOLUTELY FORBIDDEN.

ATTENTION

DO NOT REMOVE THE GUARDS WHICH REQUIRE TOOLS FOR THEIR REMOVAL.

Regulating Unit PMR-07

«
...
32
33
34
35
36
...
»

Содержание PMR-07





































































Отзывы:

Нет отзывов