Habasit PMR-07 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 68

Habasit PMR-07 Скачать руководство пользователя страница 26

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

INSTALLATION

Edition: 04/2006

Page

C-2

Replaces: 10/2005

C.1

PREPARATION OF WORKING AREA

ATTENTION

The regulating unit must be placed on a floor or support of suitable size that is able to take the
weight and bulk of the equipment.
The machinery must be placed in a room with sufficient lighting, avoiding dazzling and
stroboscopic effects. Personnel entrusted to control the regulating unit must be able to work
under normal light conditions (usually provided by neon lights fitted on the ceiling). If the lighting
is not adequate, the customer must provide additional lighting. Since the equipment's panel has
back lighting but does not have its own lighting system in the (rear) non-operational areas.

The work area must be well ventilated and have an air cycling and emission system compliant
with the law of the country of installation, such as to ensure the operator is working under the
proper working conditions.

The free space around the regulating unit must be sufficient for work and maintenance
operations and permit access to the panel according to its position.
The customer must provide the required electrical power as indicated in

.

Ensure that there is a properly stocked first aid box on site nearby.

ATTENTION

The main switch of the electrical panel must be in its “OFF” position when the regulating unit is
being connected up.

Regulating Unit PMR-07

«
...
24
25
26
27
28
...
»

Содержание PMR-07





































































Отзывы:

Нет отзывов