Rotary - TR/TRT/T5C - Installation - Introduction
This procedure tells you how to install a TR, TRT, or T5C rotary on a Haas VMC. For these instructions, the trunnion axis is the
A Axis (
TILT
). The platter axis is the B Axis (
ROTARY
).
Caution:
Make sure the power supplied to the rotary has the correct voltage. Refer to the Machine Compatibility
section before installing a rotary table.
Haas Technical Documentation
Rotary - TR/TRT/T5C - Installation
Scan code to get
the latest version
of this document
Translation
Available
Applies to machines built from:
January, 2007
AD0005 Rev K
Copyright 2020 by Haas Automation, Inc. No unauthorized reproduction | Last Published On December 13, 2016
1/12
