LAST UPDATED: 11/28/2018
Servo Amplifier - PCB Auxiliary (AUX) Load - Replacement
AD0263
Applies to machines built from: January, 1996
Introduction
1. Servo Amplifier
2. Smart Servo Amplifier
3. Smart Servo Amplifier with AUX Load
Do this procedure to install the AUX load [3]
when you install a Smart Servo Amplifier [2]. The
replacement amplifier must have the same amp
rating as the servo amplifier [1] that you remove.
You must install the AUX load [3] on the
replacement Smart Servo Amplifier [2] if you have
these two conditions:
• The machine has only two servo
amplifiers [1].
• You must replace only one of the servo
amplifiers [1] with a Smart Servo
Amplifier [2].
Note:
In other words, if after the installation
the machine has only one servo amplifier [1], the
replacement Smart Servo Amplifier must have
the AUX load [3].
Document Applies to these Parts
• 93-32-4995 PCB, AUXILIARY LOAD
SMART AMP
Servo Amplifier - PCB Auxiliary (AUX) Load - Replacement - AD0263
Page 1 of 2 pages
