HAAS + SOHN HSP 8 CATANIA-II-RLU, Инструкция по установке и эксплуатации

Страница: 18 / 28

GB
14
9.1.5. ECO-Mode
main menu
g002 Procedure:
The required line can be selected with the "Plus" or "Minus"
buttons.
The setting is saved by pressing the
"OK" button.
To exit the function, press the "On/Off" button.
ECO-Mode
no
yes
OK
9.1.6. Power Stage Blower (optional only on HSP 7)
Power Stage Blower Procedure:
The desired fan speed can be selected with the "Plus" or "Minus"
buttons.
The higher the selected value, the higher the speed of the blower.
Pressing the
"OK" button saves the setting.
To exit the function, press the "On/Off" button.
Power Stage Blower
Setpoint Blower
(1) 1 [ ]
OK
9.1.7. Manual filling (optional only on HSP 8)
main menu Procedure:
The required line can be selected with the "Plus" or "Minus"
buttons.
Press
"OK" button on the right to switch on.
The screw conveyor then turns, thus feeding the pellets.
As soon as the pellets move into the burner via the chute, the feed
process is stopped by pressing the
"OK" button.
manual filling
pulling-in motor Off
On
Note
Filling manually is used for the first use and when the pellet tank has emptied .
9.1.8. Record of defects
Record of defects
Procedure:
By means of the push-buttons "Plus" or "Minus" , it is possible to
review the existing faults with dates and times.
In the record of faults (memory of faults), there are shown the latest
64 error messages with dates and times.
In order to leave this function, Press the button
"On/Off" .
F0018 13–07 17:03
F0009 12–07 15:11
F0040 12–07 15:08
F0026 11–06 14:58
OK