Haas+Sohn ROMA, Инструкция по сборке и установке

Страница: 2 / 8

I t e m N o . : 0 6 2 1 8 5 0 1 0 9 0 3 1
V 1 3 H 0 6
2
1 PRELIMINARY REMARKS
Please read the assembly and operating instructions of your fireplace insert before these installation
instructions.
The following are additional parts of these installation instructions:

“Equipment sheet complete”,

installation instructions of the fire protection insulating set if applicable.
When unpacking the concrete elements, possible irregularities (cracks or joints) can be detected if
applicable, these should be filled with the enclosed adhesive.
2 PREREQUISITES
The load-carrying capacity of the floor must always be clarified before installing your fireplace kit.
The total weight of the complete fireplace kit (fireplace with refractory lining and the artificial stone
lining) can amount to approximately 370 to roughly 420 kg depending on the model. With wooden
beam ceilings it is essential to consult a structural engineer.
Important: Observe the regulation of the fire protection authorities and the national construction
regulations applicable at the place of installation when installing your fireplace kit: In particular,
flammable walls (e.g. wooden walls) or supporting walls made of reinforced concrete must be
protected from excessive heating. To screen flammable or structurally sensitive components from
impermissible exposure to heat, a fire protection insulating set is available as accessory to your
fireplace kit. This set includes several screen panels. We recommend attaching this fire protection
insulating set also with non-flammable walls.
3 TOOLS
For the installation of the artificial stone lining you will require the following tools:
– Water level – rubber hammer –
open-end wrench size
13mm
– Steel square 90
o
– Pencil – Paint roller
– Trowel – Sponge –
4 MATERIAL
– Paint – Plaster if required – Water
– Acrylic
5 KIT INSTALLATION
1. Carefully unpack the artificial stone lining including accessories. Check your kit for
completeness using the enclosed parts list. Sort the parts in accordance with the installation
sequence (see parts list text and illustration).