Haake 10234, Инструкция по установке и эксплуатации, Страница: 5 / 16

5
8 Fault exclusions
Due to the construction, materials, and components used for the component, the faults listed in the
table can be excluded:
Potential Fault Exclusion of Fault Limitations of Use Reason
Wear, corrosion. Permissible acc. To
tables A.4 and A.5 of
DIN EN ISO 13849-2. See sections 2
Intended use and
sections 19
Technical data .
Use of carefully select-
ed materials and man-
ufacturing processes;
use of proven springs
and special mounting
methods.
Non-tightening
/Loosening (parts of the
component). Permissible acc. To
tables A.4 and A.5 of
DIN EN ISO 13849-2. See section 2
Intended use .
Use of carefully select-
ed materials and man-
ufacturing processes;
use of proven springs
and special mounting
methods.
Weakening of force due
to
permanent defor-
mation or fracture.
Permissible acc. To
table A.5 of DIN EN
ISO 13849-2. See section 14
Operation .
Use of proven springs
and special mounting
methods.
Fracture, deformation
due to excessive load.
Permissible acc. To
tables A.4 and A.5 of
DIN EN ISO 13849-2. See section 14
Operation .
Use of carefully select-
ed materials; over di-
mensioning using safe-
ty factor 2 and replica-
tion of parts; use of
proven
springs and
special mounting
methods.
Stiffness/Getting stuck. Permissible acc. To
tables A.4 and A.5 of
DIN EN ISO 13849-2. See sections 2
Intended use and
sections 14
Operation .
Use of carefully select-
ed materials; over di-
mensioning using safe-
ty factor 2 and replica-
tion of parts; use of
proven
springs and
special mounting
methods.