10
Installing the device by using front and rear mounting brackets
1.
Wear the ESD wrist strap and make sure the rack is sturdy and is reliably grounded.
2.
Use a front mounting bracket to mark the cage nut installation position on the front rack posts.
Install cage nuts.
Figure 7
Installing cage nuts
3.
Use the screws supplied with the front mounting brackets to secure the front mounting brackets to
both sides of the device.
Figure 8
Attaching the front mounting brackets to the device
4.
Attach the load-bearing screws supplied with the rear mounting brackets to both sides of the
device.
The load-bearing screws will be in close touch with the rear mounting brackets to support the
device.
2
3
1
