H3C WSG1812X-PWR, Руководство по установке, Страница: 31 / 47

1
1
Hardware management and
maintenance
The command lines and outputs depend on the software version that runs on the device.
Displaying hardware information about the device
Displaying software and hardware version information about
the device
Use the display version command to display software and hardware version information about
the device. The output includes the following information:
•
Current software version.
•
Current hardware version.
•
Device operating time.
The output depends on the software and hardware version of the device.
<H3C> display version
H3C Comware Software, Version 7.1.064, Alpha 5611
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.
H3C WSG1812X-PWR uptime is 0 weeks, 0 days, 0 hours, 3 minutes
Last reboot reason : Power on
Boot image: flash:/boot.bin
Boot image version: 7.1.064, Alpha 5611
Compiled Jun 13 2022 15:00:00
System image: flash:/system.bin
System image version: 7.1.064, Alpha 5611
Compiled Jun 13 2022 15:00:00
with 1 ARM 2000MHz Processor
2048M bytes DDR4
3776M bytes EMMC Memory
Hardware Version is Ver.A
CPLD Version is 001
Basic Bootrom Version is 0.53
Extend Bootrom Version is 0.53
[Subslot 0]H3C WSG1812-PWR Hardware Version is Ver.A
Displaying the operational statistics about the device
When you perform routine maintenance or the system fails, you might need to display the
operational information of each feature module to locate failures. Typically, you need to run the