2-5
Figure2-5 Attaching the AP brackets to the AP
Mounting the AP on a wall
The following procedure mounts the AP on a wall with the vertical pole mounting arrow on the AP
bracket pointing up. To mount the AP on a wall with the horizontal pole mounting arrow on the AP
bracket pointing up, adjust the installation direction of the wall/pole bracket accordingly.
To mount the AP on a wall:
1.
Use the wall/pole bracket to mark four installation holes on the wall.
Figure2-6 Marking the installation holes
2.
Use a hammer drill to drill holes with a diameter of 8 mm (0.32 in) at the marked locations, as
shown in
