29
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
64.
Press
Ctrl+Y
to convert the AP mode.
Please select the new mode
Current mode is Fit
============================================================================
|NO. Mode |
|1 Fit Mode |
|2 Anchor-AC (Virtual AC mode) |
|3 Cloud Mode |
|0 Exit |
============================================================================
Enter your choice(0-3):
65.
Enter the mode number.
The mode takes effect immediately without an AP restart.
Converting the AP mode from the Cloudnet
66.
Set up the configuration environment as shown in
, and configure the AP to obtain an
IP address through DHCP.
Make sure the following conditions are met:
The AP cannot register on any AC.
The AP can use the IP address assigned by the DHCP server to reach the public network.
The DNS server can translate the address of the Cloudnet correctly.
