15
Appendix B Ports and LEDs
Ports
The AP provides the following ports:
•
One console port
•
Two GE ports
•
One power port
•
One USB port
The AP also has a reset button and a security slot. The security slot is 7 × 3 mm (0.28 × 0.12 in) in
size. If you press and hold the reset button for 5 seconds or less, the AP restarts. If you press and
hold the reset button for over 5 seconds, the AP restarts with factory defaults.
Figure 22 Ports on the AP
(1) Power port
(2) 10/100/1000 Mbps Ethernet port (GE1/PoE)
(3) 10/100/1000 Mbps Ethernet port (GE2/PoE)
(4) Console port
(5) USB port
(6) Reset button
(7) Security slot
Table 4 Port description
Port
Standards and protocols
Description
Console port
RS/EIA-232
The console port is used for device configuration
and management.
GE1/PoE
•
IEEE802.3
•
IEEE802.3u
•
IEEE802.3af
The port acts as an uplink interface to connect to
the Internet or MAN. It also supports PoE.
In fit AP mode, the port is referred to as GE1/0/1
in MAP files and gigabitethernet 1 in AC
configurations.
GE2/PoE
•
IEEE802.3
•
IEEE802.3u
•
IEEE802.3af
The port acts as an uplink interface to connect to
the Internet or MAN. It also supports PoE.
In fit AP mode, the port is referred to as GE1/0/2
in MAP files and gigabitethernet 2 in AC
configurations.
Power port (54 VDC)
N/A
The power port re54 VDC power from
the local power source.
USB USB2.0
The port is used for data reading and writing and
charging.
1
2
3
4
5
6
7
