11
Connecting the AP to a power supply
CAUTION:
Before powering on the AP, make sure the power supply is reliably grounded.
You can power the AP with a local power or by using 802.3af PoE.
Connecting a PoE power supply
Use an Ethernet cable to connect the Ethernet interface that supports PoE on the AP to a PoE
switch.
Figure 15 Connecting a PoE power supply
(1) Ethernet interface
(2) Ethernet cable
(3) PoE switch
Connecting the local power supply
No AC/DC adapter and power cord are provided with the AP. Prepare them yourself if required.
Table 2 AC/DC adapter specifications
Item Specification
Input
100 VAC to 240 VAC
Output
+48V
at 0.52 A
You can power the AP by using an AC/DC adapter. Use the AC/DC adapter to connect the power
port of the AP to the local power source.
