H3C WA2620X-AGNP Скачать руководство пользователя страница 289

Страница: 289 / 447

276

Item Description

Multicast Trigger

•

Enable

—Enable the multicast trigger function of 802.1X to send multicast

trigger messages to the clients periodically for initiating authentication. By

default, the multicast trigger function is enabled.

•

Disable

—Disable the 802.1X multicast trigger function.

IMPORTANT:

For a WLAN, the clients can actively initiate authentication, or the AP can

discover users and trigger authentication. Therefore, the ports do not need to
send 802.1X multicast trigger messages periodically for initiating

authentication. Disable the multicast trigger function in a WLAN because the
multicast trigger messages consume bandwidth.

MAC Authentication

Select the MAC Authentication option.

Domain

Select an existing domain from the drop-down list.
The default domain is

system

. To create a domain, select

Authentication

AAA

from the navigation tree, click the

Domain

Setup

tab, and enter a new

domain name in the

Domain

Name

field.

•

The selected domain name applies to only the current wireless service,

and all clients accessing the wireless service use this domain for

authentication, authorization, and accounting.

•

Do not delete a domain name in use. Otherwise, the clients that access the

wireless service are logged out.

Configuring crypto type wireless service

Configuring basic settings for the crypto type wireless service

Select

Wireless Service

Access Service

from the navigation tree.

Click the

icon corresponding to the target crypto type wireless service.

The page for configuring a wireless service appears.

Figure 275

Crypto type wireless service

Configure the basic settings for the crypto wireless service.

Click

Apply

Configuring advanced settings for the crypto type wireless service

Select

Wireless Service

Access Service

from the navigation tree.

Содержание WA2620X-AGNP
































































































































































































































































































































































































































































Результаты поиска

Содержание WA2620X-AGNP

Отзывы:

H3C WA2620X-AGNP, Инструкция по настройке через веб-интерфейс, Страница: 289 / 447

Результаты поиска

Содержание WA2620X-AGNP

Отзывы: